Frame

T-base frame, foldable. Frame consists of Ø 40 x 2 mm circular metal columns with high-gloss flat steel stabilizers that each consist of 2 parts (6 x 35 mm and 6 x 20 mm). The upper transversal beams are made from 5 x 27 mm highly polished steel. The two sides of the table are suspended in special two-part hinges. The folding mechanism has been screw-fastened to the table top with threaded sleeves. The release knob is movably mounted, the hinge heads also serve to protect the table when stacked. The end of the column has been equipped with a buffer for shock absorption.

Frame surfaces

Frame surface covered by extra-strong chrome-plating, applied in multiple layers.

Table tops

Plate C-LB: 30 mm thick, (lightweight) poplar plywood board, top surface optionally covered with HPL plastic or wood veneer according to the BRUNE® collection. Lower surface white HPL or beech veneer. Straight edge, 2 mm thick, in material to match table top (plastic for plastic, veneer for veneer).

Plate D-LB: 30 mm thick, 28 mm thick (lightweight) poplar plywood board, top surface optionally covered with HPL plastic or wood veneer according to the BRUNE® collection. Lower surface white HPL or beech veneer. Edge with solid beechwood edge band, smooth finish, 9 mm thick.

Plate E-LB: 30 mm thick, 28 mm (lightweight) poplar plywood board, coated in high-pressure laminate (HPL) or veneer according to the BRUNE® collection. Lower surface: white HPL or beech veneer. Edge: solid beech edge band, crowned, 9 mm thick.

Veneer finish

Real wood veneer from the BRUNE ® collection comes as a standard varnished with a low solvent content water-based lacquer, optionally stained to the BRUNE® collection.

HPL surfaces

Resopal®-HPL from the BRUNE® collection.

Gliders

Height-adjustable plastic base gliders, optionally with felt.

Dimensions