Zitmeubelen
Tafels
Kapstoken
Transportmiddelen
Restaureren
Projecten
Stof
Beits- & Stahlkleuren
CPL en kunststof zitschalen
Tafelbladuit- voeringenZitmeubelen
SET
Stapelstoel
Het prograama SET is een elgante en stijlvolle allrounder voor alle mogelijke inrichtingen. Vijf onderstellen, drie kuipvormen en uiteraard keuzes qua stoffering talrijke details , variaties en toebehoren - alles wat U nodig hebt voor een persoonlijk accent. Een verfrissend design voor auditoria en bistro, voor kanteren en vergaderzalen.
Downloads
- SET_Vierfußgestell_Productinformation
(2 MB) - SET_Freischwinger_Productinformation
(238 KB) - SET_Kufengestell_Productinformation
(202 KB) - 1230-001.dwg
(2 MB) - 1230-003.dwg
(2 MB) - 1230.dwg
(2 MB) - 1231.dwg
(2 MB) - 1232-001.dwg
(2 MB) - 1232-003.dwg
(2 MB) - 1232.dwg
(2 MB) - 1233.dwg
(2 MB) - 1240-001.dwg
(2 MB) - 1240-003.dwg
(2 MB) - 1240.dwg
(2 MB) - 1241.dwg
(2 MB) - 1242-001.dwg
(2 MB) - 1242-003.dwg
(2 MB) - 1242.dwg
(2 MB) - 1243.dwg
(2 MB) - 1243_Schale-A.dwg
(3 MB) - 1250-001.dwg
(2 MB) - 1250-003.dwg
(2 MB) - 1250.dwg
(2 MB) - 1251.dwg
(2 MB) - DWG_1230-001-Schale-B.dwg
(2 MB) - DWG_1230-001_Schale-A.dwg
(2 MB) - DWG_1230-003_Schale-A.dwg
(3 MB) - DWG_1230-003_Schale-B.dwg
(3 MB) - DWG_1230_Schale-A.dwg
(2 MB) - DWG_1230_Schale-B.dwg
(2 MB) - DWG_1231_Schale-A.dwg
(3 MB) - DWG_1231_Schale-B.dwg
(3 MB) - DWG_1232-001_Schale-A.dwg
(3 MB) - DWG_1232-001_Schale-B.dwg
(3 MB) - DWG_1232-003_Schale-A.dwg
(3 MB) - DWG_1232-003_Schale-B.dwg
(2 MB) - DWG_1232_Schale-A.dwg
(2 MB) - DWG_1232_Schale-B.dwg
(2 MB) - DWG_1233_Schale-A.dwg
(3 MB) - DWG_1233_Schale-B.dwg
(3 MB) - DWG_1240-001_Schale-A.dwg
(3 MB) - DWG_1240-001_Schale-B.dwg
(3 MB) - DWG_1240-003_Schale-A.dwg
(3 MB) - DWG_1240-003_Schale-B.dwg
(3 MB) - DWG_1240_Schale-A.dwg
(3 MB) - DWG_1240_Schale-B.dwg
(2 MB) - DWG_1241_Schale-A.dwg
(3 MB) - DWG_1241_Schale-B.dwg
(3 MB) - DWG_1242-001_Schale-A.dwg
(3 MB) - DWG_1242-001_Schale-B.dwg
(3 MB) - DWG_1242-003_Schale-A.dwg
(3 MB) - DWG_1242-003_Schale-B.dwg
(3 MB) - DWG_1242_Schale-A.dwg
(3 MB) - DWG_1242_Schale-B.dwg
(3 MB) - DWG_1243_Schale-B.dwg
(3 MB) - DWG_1250-001_Schale-A.dwg
(3 MB) - DWG_1250-001_Schale-B.dwg
(3 MB) - DWG_1250-003_Schale-A.dwg
(3 MB) - DWG_1250-003_Schale-B.dwg
(3 MB) - DWG_1250_Schale-A.dwg
(2 MB) - DWG_1250_Schale-B.dwg
(2 MB) - DWG_1251_Schale-A.dwg
(3 MB) - DWG_1251_Schale-B.dwg
(3 MB)
Frame
4-legged frame, optionally with 20 x 2 mm steel tube arm rests featuring transversal link connectors. Frames with drilled holes to accommodate the plywood seat. Welded frame. Armrests made from a black soft-grip sleeve.
Frame surfaces
Standard version of the frame: chrome-plated, optionally powder-coated according to the BRUNE ® collection.
Seat shell
Ergonomically shaped, one-piece seat shell made from beech plywood, 10 mm thick, attached with several layers of glue. Shell A: tapering off straight in a downward direction. Shell B: slightly tapering off straight in an upward direction. Plywood shell fastened to lower frame with flat-head screws and M5 sleeve nuts. Shell on adjusted plastic spacers. Partial seat upholstery fastened with screws.
Wooden surfaces
Wooden elements made from beech wood, with natural varnish (low-solvent water varnish) in the standard version. Optionally stained according to the BRUNE ® collection.
Upholstery
Seats or seats and back supports are optionally available with partial upholstery or a fully upholstered seat shell, fabric cover according to the BRUNE® collection, fabric categories 3, 4, 6, 7 or 8.
| Seat cushion foam: | SG/CH 35/50 | approx. 25 mm thick | ||
| Back cushion foam: | SG/CH 35/50 | approx. 10 mm thick |
SG = specific gravity, weight per m³. CH = compression hardness (e.g.: 50 ≙ approx. 50 g/cm² at a compression level of 40 %)
Gliders
| Standard version: | plastic gliders | |
| Optionally: | gliders with plastic inserts | |
| gliders with felt inserts |
Dimensions | 1230 without armrests
| Spatial dimensions: | B | 52 cm | ||
| T | 54 cm | |||
| H | 92 cm | |||
| SH | 45 cm | |||
| Weight: | 6,0 kg | |||
| 6,8 kg (seat padding) 7,3 kg (seat and back padding) 7,0 kg (fully upholstered) |
Dimensions | 1232 with armrests
| Spatial dimensions: | B | 55 cm | ||
| T | 54 cm | |||
| AH | 68 cm | |||
| H | 92 cm | |||
| SH | 45 cm | |||
| Weight: | 7,0 kg | |||
| 7,8 kg (seat padding) 8,3 kg (seat and back padding) 8,0 kg (fully upholstered) |
Stackability
| Stacking type: | vertical stapling, 10 chairs | |
| Required floor space: | L 70 cm | |
| B 55 cm (without armrests) B 60 cm (with armrests) H 195 cm |
Row linking
| Row linking system: | “Button-and-hook” system | |
| for chair-chair | chair-armchair | ||
| Optionally: | Hook-and-eye-system integrated into the link connector | |
| for chair-chair |
Accessories
Chair trolley: Foldable writing desk: | Model 1996 for the transport of stacked chairs Model 1230-018 on request |
SET Freischwinger Productinformation
Areas of use
HEALTHCARE SERVICES | SEMINARS | MEETINGS | CONGRESSS | MULTIFUNCTIONAL USE | LIVING
With its clear geometric outlines and high levels of comfort and convenience, the SET is the perfect chair to complement sophisticated interior spaces.
Frame
Made from bent 22 x 2.5 mm high-precision spring steel tubes. Frames can be stacked, due to inward bend of the skids. Armrests made from a black soft-grip sleeve.
Frame surfaces
Standard version of the frame: chrome-plated, optionally powder-coated according to the BRUNE ® collection.
Seat shell
Ergonomically shaped, one-piece seat shell made from beech plywood, 10 mm thick, attached with several layers of glue. Shell A: tapering off straight in a downward direction. Shell B: slightly tapering off straight in an upward direction. Plywood shell fastened to lower frame with flat-head screws and M5 sleeve nuts. Shell on adjusted plastic spacers. Partial seat upholstery fastened with screws.
Wooden surfaces
Wooden elements made from beech wood, with natural varnish (low-solvent water varnish) in the standard version. Optionally stained according to the BRUNE ® collection.
Upholstery
Seats or seats and back supports are optionally available with partial upholstery or a fully upholstered seat shell, fabric cover according to the BRUNE® collection, fabric categories 3, 4, 6, 7 or 8.
| Seat cushion foam: | SG/CH 35/50 | approx. 15 mm thick | ||
| Back cushion foam: | SG/CH 35/50 | approx. 10 mm thick |
SG = specific gravity, weight per m³. CH = compression hardness (e.g.: 50 ≙ approx. 50 g/cm² at a compression level of 40 %)
Gliders
| Standard version: | no gliders | |
| Optionally: | plastic gliders | |
| plastic gliders with felt inserts |
Dimensions | 1240 + 1241 without armrests
| Spatial dimensions: | B | 52 cm | ||
| T | 56 cm | |||
| H | 90 cm | |||
| SH | 45 cm | |||
| Weight: | 7,0 kg | |||
| 7,8 kg (incl. seat cushion) 8,3 kg (incl. seat and back cushions) 8,0 kg (incl. fully upholstered seat shell) |
Dimensions | 1242 + 1243 with armrests
| Spatial dimensions: | B | 52 cm | ||
| T | 56 cm | |||
| AH | 68 cm | |||
| H | 90 cm | |||
| SH | 45 cm | |||
| Weight: | 8,5 kg | |||
| 9,3 kg (incl. seat cushion) 9,8 kg (incl. seat and back cushions) 9,5 kg (incl. fully upholstered seat shell) |
Stackability
| Stacking type: | front stapling, 5 chairs | |
| Required floor space: | L 71 cm | |
| B 52 cm without armrests B 52 cm with armrests H 114 cm |
Accessories
| Chair trolley: | Model 1996 for the transport of stacked chairs |
SET Kufengestell Productinformation
Areas of use
COMMUNIT Y CENTRES + INDOOR ARENAS | HEALTHCARE SERVICES | SEMINARS | CAFETERIAS | MULTIFUNCTIONAL USE |
With its clear geometric outlines and high levels of comfort and convenience, the SET is the perfect chair to complement sophisticated interior spaces.
Frame
Open, stackable skid frame made from 25 x 2 mm high-precision spring steel tubes, welded together with rear frame.
Frame surfaces
Standard version of the frame: chrome-plated, optionally powder-coated according to the BRUNE ® collection.
Seat shell
Ergonomically shaped, one-piece seat shell made from beech plywood, 10 mm thick, attached with several layers of glue. Shell A: tapering off straight in a downward direction. Shell B: slightly tapering off straight in an upward direction. Plywood shell fastened to lower frame with flat-head screws and M5 sleeve nuts. Shell on adjusted plastic spacers. Partial seat upholstery fastened with screws.
Wooden surfaces
Wooden elements made from beech wood, with natural varnish (low-solvent water varnish) in the standard version. Optionally stained according to the BRUNE ® collection.
Upholstery
Seats or seats and back supports are optionally available with partial upholstery or a fully upholstered seat shell, fabric cover according to the BRUNE® collection, fabric categories 3, 4, 6, 7 or 8.
| Seat cushion foam: | SG/CH 35/50 | approx. 15 mm thick | ||
| Back cushion foam: | SG/CH 35/50 | approx. 10 mm thick |
SG = specific gravity, weight per m³. CH = compression hardness (e.g.: 50 ≙ approx. 50 g/cm² at a compression level of 40 %)
Gliders
| Standard version: | plastic gliders | |
| Optionally: | gliders with felt inserts |
Dimensions | 1250
| Spatial dimensions: | B | 51 cm | ||
| T | 56 cm | |||
| H | 90 cm | |||
| SH | 45 cm | |||
| Weight: | 7,0 kg | |||
| 7,8 kg (incl. seat cushion) 8,3 kg (incl. seat and back cushions) 8,0 kg (incl. fully upholstered seat shell) |
Stackability
| Stacking type: | front stapling, 5 chairs | |
| Required floor space: | L 73 cm | |
| B 51 cm without armrests H 110 cm |
Accessories
| Chair trolley: | Model 1996 for the transport of stacked chairs |
Gerd Rausch
Dipl.-Ing. Gerd Rausch (geb. in 1940 in Keulen) is architect en ontwerper. Hij studeerde architectuur in Keulen en werkte hierna twee jaar voor het ontwerpbureau van prof. Joachim Schürmann. Van 1967 tot 2005 was hij als vaste ontwerper voor BRUNE werkzaam en vormde in deze periode met zijn productontwerp en zijn communicatiedesign in belangrijke mate de uitstraling van het bedrijf. Sinds 2005 wijdt hij zich intensief aan de vrije schilderkunst en speciaal architectuuradvies. Hij is onder andere medeoprichter van de kunstenaarsgroep p e n t i m e n t i.
Gerd Rausch woont en werkt in Keulen.