zur Startseite

Seating

FLOW

The name says it all. The various models in this family of chairs are characterised by a uniformly flowing design idiom. Each frame structure has a unique look of its own, but subtly communicates its association with the other chairs in the family through uniformly scaled radii and consistently designed, comfortable seat shells. The family's wide range of upholstery options and material combinations promotes the cross-functional use of the chairs in different areas of application.

Downloads

Downloads

ProductinformationDesigner

Frame

Model1470: Four-legged frame, made of precision round steel tube ZSTE 420, Ø 16 x 2 mm.
Model 1475: Four-legged frame with armrests, made of precision round steel tube ZSTE 420, Ø 16 x 2 mm.
Model 1480: Skid frame made of 12 mm quality steel wire, St37. Three-dimensionally transverse frames deformed and made of flat steel 25 x 6 mm.
Model 1485: Skid frame with armrests made of 12 mm quality steel wire, St37. Three-dimensionally transverse frames deformed and made of flat steel 25 x 6 mm.
Model 1495: Cantilevered Frame made of precision round steel tube ZSTE 420, Ø 22 x 2,5 mm.

 

Frame surfaces

Standard version of the frame: chrome-plated, optionally powder-coated according to the BRUNE ® collection.

 

Seat shell

Ergonomically shaped solid shell made from beech plywood, 10 mm thick, multi-glued. By means of threaded insert invisibly screwed to the frame.

 

Wooden surfaces

Wooden elements made from beech wood, with natural varnish (low-solvent water varnish) in the standard version. Optionally stained according to the BRUNE ® collection. Optional: Seat shell in surface veneer, finished in natural oak.

 

Upholstery

Seats or seats and back supports are optionally available with partial upholstery or a fully upholstered seat shell, fabric cover according to the BRUNE® collection.

Seat cushion foam:  SG/CH 35/50  ca. 15 mm stark
Back cushion foam: SG/CH 35/50 ca. 15 mm stark
Back cushion foam on back SG/CH 35/50 ca.   5 mm stark (fully upholstered seatshell)
Seat cushion foam padding: SG/CH 35/50 ca. 15 mm stark
Back cushion foam padding: SG/CH 35/50 ca. 10 mm stark

SG = specific gravity, weight per m³     CH = compression hardness (e.g.: 50 ≙ approx. 50 g/cm² at a compression level of 40 %)

 

Stacking protection

The stacking protection is firmly bolted to the frame.

 

Gliders

Models 1470 and 1475

Standard version:  jointed plastic gliders
Optionally: jointed felt gliders
  jointed metal gliders

Models 1480, 1485 and 1495

Standard version:  without gliders          
Optionally: plastic gliders 
  felt gliders

 

Dimensions | 1470 without armrests

Dimensions: B 54,0 cm
  T 55,0 cm
  H 86,0 cm
  SH 45,0 cm
Weights:   5,2 kg
    6,0 kg (seat padding)
6,8 kg (seat and back padding)
7,0 kg (front side padding)
6,2 kg (fully upholstered)

 

Dimensions | 1475 with armrests

Dimensions: B 59,0 cm
  T 55,0 cm
  AH 65,0 cm
  H 86,0 cm
  SH 45,0 cm
Weights:   6,2 kg
    7,0 kg (seat padding)
7,8 kg (seat and back padding)
8,0 kg (front side padding)
7,2 kg (fully upholstered)

 

Dimensions | 1480 without armrests

Dimensions: B 54,0 cm
  T 55,0 cm
  H 87,0 cm
  SH 46,0 cm
Weights:   7,0 kg
    7,8 kg (seat padding)
8,6 kg (seat and back padding)
8,8 kg (front side padding)
8,0 kg (fully upholstered)

 

Dimensions | 1485 with armrests

Dimensions: B 54,0 cm
  T 55,0 cm
  AH 67,0 cm
  H 87,0 cm
  SH 46,0 cm
Weights:   7,2 kg
    8,0 kg (seat padding)
8,8 kg (seat and back padding)
9,0 kg (Sfront side padding)
8,2 kg (fully upholstered)

 

Dimensions | 1495 with armrests

Dimensions: B 53,0 cm
  T 59,0 cm
  AH 69,5 cm
  H 88,0 cm
  SH 46,0 cm
Weights:   9,0 kg
    9,8 kg  (seat padding)
10,6 kg (seat and back padding)
10,8 kg (front side padding)
10,0 kg (fully upholstered)

 

Stackability

Models 1470-1476

Stacking type: front stapling, stackable 6 chairs
   10 chairs on inclined chair stacking trolley 1997
Stacking protection recommended
Required floor space: Length: 76 cm
  Length: 114 cm on stacking trolley
Width: 55 cm without armrests
Width: 59 cm with armrests
Height: 110 cm
Height: 135 cm on stacking trolley

Models 1480-1486

Stacking type: front stapling, stackable 6 chairs
   10 chairs on inclined chair stacking trolley 1125
Stacking protection recommended
Required floor space: Length: 75 cm
  Length: 117 cm on stacking trolley
Width: 54 cm without armrests
Width: 54 cm with armrests
Width: 65 cm on stacking trolley
Height: 111 cm
Height: 148 cm on stacking trolley

Models 1495-1496

Stacking type: front stapling, stackable 6 chairs
   6 chairs on inclined chair stacking trolley 1997
Stacking protection recommended
Required floor space: Length: 76 cm
  Length: 114 cm on stacking trolley
Width: 53 cm
Width: 73 cm on stacking trolley
Height: 118 cm
Height: 126 cm on stacking trolley

 

Row linking

Row linking system Models 1470 and 1475:  Retractable hook-eye system
for chair-chair | chair-armchair | armchair-armchair
Row linking system Models 1480 and 1485: In the glider integrated hook-eye system
for chair-chair | chair-armchair | armchair-armchair

 

Accessories

Chair trolley:  Model 1995 for the transport of stacked chairs
Inclined chair stacking trolley: Models 1997 and 1125 for the storage and transport of stacked chairs

Downloads for this product

Prof. Matthias Rexforth

Prof. Matthias Rexforth

Matthias Rexforth (born 1963) studied product design at the University of Kassel and received his diploma in 1994. In 1995, he founded his atelier x_products and since then he has designed furniture for national and international companies. Since 2003, he holds a chair for Interior Design at the FH Aachen. His work for BRUNE were, among others, awarded with the Red Dot Award.
Matthias Rexforth is lives and works in Krefeld.