Frame

4-foot frame featuring two continuously and evenly curved side sections from Ø 16 x 2 mm tubular steel in special cantilever quality (ZSTE420) and connecting 25 x 8 mm flat-steel ribs that feature drill holes to accommodate the seat shell. The side sections are securely welded (clean joints) to the connecting ribs (through metal active gas welding), the set shell and the frame are connected by screws in four different locations.

Frame surfaces

Standard version of the frame: powder-coated in black, optionally powder-coated according to the BRUNE® collection or chrome-plated.

Seat shell

Ergonomically shaped, one-piece shell made from beech plywood, approx. 9 mm thick, with multiple layers of glue. Fastened to the plywood shell at the lower frame with flat-head screws and threaded nuts (concealed).

Wooden surfaces

Wooden elements made from beech wood, with natural varnish (low-solvent water varnish) in the standard version. Optionally stained according to the BRUNE ® collection.

Upholstery

Seats or seats and back supports and shells are optionally available with partial upholstery or fully upholstered shell, fabric cover according to the BRUNE® collection, fabric categories 3, 4, 6, 7 or 8.

SG = specific gravity, weight per m³.    CH = compression hardness (e.g.: 50 ≙ approx. 50 g/cm² at a compression level of 40 %)

Armrests upholstery

Armrests optionally padded, 200 mm long. Fabric cover according to the BRUNE® collection, fabric categories 3, 4, 6, 7 or 8. In case of padded armrests stackability is limited.

Gliders

Dimensions | 1360 without armrests

Dimensions | 1365 with armrests

Stackability

Row linking

Accessories

VARIUS High Chair Productinformation

Areas of use

SEMINARS | MEETINGS | CONGRESSES | CAFETERIAS | RESTAURANTS + BANQUET | MULTIFUNCTIONAL USE | LIVING |

VARIUS implements a wide range of material and colour concepts with equal amounts of ease and style. Its wide colour range, in combination with partial upholstery and full upholstery options, creates a virtually unlimited number of possibilities.

Frame

4-foot frame made from Ø 16 x 2 mm tubular steel (Zste420). The upper sections of the rear legs are formed (bent) with a R 27 mm interior curvature. 25 x 8 mm flat-steel frame ribs have been equipped with drill holes to accommodate the seat shell. Frame and foot support made from Ø 16 x 2 mm tubular steel (Zste420). The Ø 12 mm lateral connecting bars have been welded to the frame (through metal active gas welding).

Frame surfaces

Base standard chromium-plated, if desired powder-coated according BRUNE collection.

We wish you to point out that the powder-coated of the foot support can be damage by utilization, these are excluded from any warranty.

Seat shell

Ergonomically shaped, one-piece shell made from beech plywood, approx. 9 mm thick, with multiple layers of glue. Fastened to the plywood shell at the lower frame with flat-head screws and threaded nuts (concealed). The standard version of the back support is approx. 200 mm high.

Wooden surfaces

Wooden elements made from beech wood, with natural varnish (low-solvent water varnish) in the standard version. Optionally stained according to the BRUNE ® collection.

Upholstery

Seats are optionally available with partial upholstery or fully upholstered shell, fabric cover according to the BRUNE ® collection, fabric categories 3, 4, 6, 7 or 8.

SG = specific gravity, weight per m³.    CH = compression hardness (e.g.: 50 ≙ approx. 50 g/cm² at a compression level of 40 %)

Gliders

Dimensions | 1370 without armrests

Stackability